Photo of Aircraft Support
Lifestyle Photo of Aircraft Support
Photo of Aircraft Support
Lifestyle Photo of Aircraft Support

Aircraft Support

No reviews
Description

Designed to handle the heavy demands of military use, the Aircraft Support™ from Little Giant Ladder Systems® is the elite ladder for use with military aircraft.

Multi-Position

Compact enough to set up inside or outside an aircraft vessel, the multi-position Aircraft Support helps you get to work with ease. Configure the ladder in stepladder, extension, staircase, 90-degree and trestle-and-plank* scaffolding positions, so you can get closer to your work in a fraction of the time. This ladder also is certified as a two-person ladder when used in the stepladder position.

Built for Aircraft

As a military professional, your needs on a ladder differ from civilian use, which is why Little Giant specifically made the Aircraft Support ultra-compatible with your unique needs. The airstrip can be windy, but the attached D-rings tie down each leg of the ladder for added stability on windy or unstable surfaces. In the event of the ladder tipping from a strong breeze, the shock-absorbing rubber impact bumpers protect your ladder.

 

Specs

This ladder meets or exceeds all OSHA and ANSI standards, and is rated Type IA to hold 300 lbs., and in stepladder configuration, can hold 300 lbs. on both sides. It is available in 13’, 17’, 22’ and 26’ sizes.

 

*Plank not included

Specs

Aircraft Support Specs

Weight Capacity 300 lbs.
Warranty 5-Year
Model Number 10101AS
Country of Origin USA
Product Material Aluminum
ANSI Duty Rating Type IA - Extra Heavy Duty
90° Position Yes
Ladder Type Telescoping - Articulated
Feet Standard pick foot
Product Weight 31.5 lb
Palm & Hinge Lock System Military Hinge
Ship length 3.83 ft
Ship Width 2.08 ft
Ship Height 8 in
Spreader System Hinge Lock
Tip & Glide Wheels™ false
V-Bar No
Ratchet Levelers No
Ground Cue No
Air Deck Ports No
Claw No
Scaffolding Position Yes

24 ladders in 1


Work safely, at height


3-in-1 ladder

FAQs
What size ladder do I need?

Size refers to the ANSI definition of length. ANSI states that the size is defined by the combined length of all rail sections, with a tolerance of +/-3” on each section. Note, this does not take into account any overlap between sliding sections like those on an extension or multi-purpose ladder. This can cause a disparity in the size of the ladder versus the actual height. To determine which ladder you need, Werner recommends you reference maximum reach height instead of size.

What is the difference between SIZE and MAXIMUM REACH HEIGHT?

Ladder specifications can be confusing due to safety regulation requirements. According to ANSI (American National Standards Institute), the ladder size is defined as the total length of each section and does not account for overlap on extension ladders. As a result, the overlapping sections reduce the total length of the ladder. When purchasing any ladder customers should pay particular attention to the maximum reach to ensure the correct product for the job.

Where Can I Purchase Replacement Parts For My Little Giant Ladder?

Little Giant Ladders offers replacement parts for products manufactured by Little Giant Ladders only. Please contact Customer Service at 1 (800) 453-1192 or shop online at https://www.littlegiantladders.com/pages/ladder-parts.

When ordering replacement parts, you will need to provide the Little Giant Ladder Model Number and Mark Number or a description of the part you need.

You May Also Like