Multi-position Ladder Accessory
No more bucket balancing acts. No more dropped drills. No more falling fasteners. The Tool Tray™ from Little Giant Ladder Systems® has all the grooves and slots you need to keep your kit within arm’s reach. Compatible with the Little Giant multi-position ladder family.*
Stay Organized, Stay Fast
Keep it close, keep it organized, and keep it quick. The Tool Tray is packed with features designed for speed: a magnetic tray, a drill compartment, slots for screwdrivers and puddy knives, friction locks for multiple can sizes and more.
Install It and Go
Put it on and leave it on. The Tool Tray functions at any height in the A-frame position and stays out of the way in the extension or storage positions.
*Not compatible with products that use the classic Little Giant rung channel, such as the Super Duty, SkyScraper or original Aircraft Support.
Articulating Ladder Tool Tray Specs
Weight Capacity None Warranty None Model Number 15047-002 90° Position No ANSI Duty Rating None Country of Origin China Feet None Product Weight 1.5 lb Product Material Plastic Palm & Hinge Lock System None Ship length 1.5 ft Ship Width 1.04 ft Ship Height 6 in Spreader System None Tip & Glide Wheels™ No V-Bar No Ratchet Levelers No Ground Cue No Air Deck Ports No Claw No Scaffolding Position No
What’s the difference between model size and extension height?
You may have noticed that our model sizing is taller than the actual extension height of any telescoping Little Giant ladder. This is due to the requirements of US ladder standards, published by the American National Standards Institute (ANSI): A14.2 for aluminum ladders and A14.5 for fiberglass ladders. These standards dictate that ladder model size should be displayed as the total rail length of each section of a ladder. All US manufacturers use the same sizing system in order to comply with ANSI. Extension ladders, articulating ladders and other multipurpose ladders often have multiple sections, so the ANSI-compliant size is the sum of the lengths of each section, not the actual maximum extended height. Please refer to the individual ladder’s instruction manual for details on maximum working length, highest standing level and maximum reach. We’ve described a few of these measurements in detail below.
What is maximum working length?
The final locks on any telescoping ladder sections will adhere to ANSI requirements, meaning there will be an appropriately sized overlap between inner and outer railing when fully extended. The maximum working length is the length of the ladder at its final locked extension length.
What is highest standing level?
Depending on the ladder and configuration, ANSI standards dictate that certain rungs (such as the ladder top cap or top step of an A-frame ladder) should not be used as a step. The highest standing level takes those standards into consideration and measures the highest ANSI-approved standing rung when the ladder is extended to maximum working length.
What is maximum reach?
Maximum reach (or “max reach”) is the combination of the ladder’s highest standing level and a common user’s reach height. The reach height addition is based on a 5'6" [1.68 m] person with a 12" [30 cm] vertical reach. The term is used in ladder merchandising throughout the climbing solutions industry to help users quickly comprehend which projects are compatible with which ladders.